TPI 709R Flue Gas Analyser Kit (709R-KIT)

Combustion Analysis

• Check Net/Gross Efficiency
• Adjust CO, CO2 & Ratio Values
• Check CO2 & O2 Values on Appliance

Differential Pressure

• Adjust Gas/Air Mixture
• Test Air Pressure Switch
• Use for Tightness Testing

Differential Temperature

• Flow & Return Adjustments
• Balance Radiators
• Check Thermostat & Water Temperatures

CO Detection

• Highlights CO Spillage
• Indicates Areas of High CO Production

Other Features

• Pump driven for fast response
• Push on fittings for fast and easy use
• Will not shut off if 15 ppm CO is present, for increased safety
• Large easy to read backlit display
• Optional A740 IR printer available for hard copies of test results

Instrument Specifications
Operating Temperature Range	-10° to 50°C (14° to 122°F)
Battery	Rechargeable Ni-MH, > 6 Hour Life
Charger Input Voltage	115V or 230V : 50/60 Hz AC
Fuels	Natural Gas, LPG, Light Oil, Heavy Oil
	OPT 1 = Bituminous Coal
	OPT 2 = Anthracite Coal
	OPT 3 = Coke
	OPT 4 = Butane
	OPT 5 = Wood (Dry)
	OPT 6 = Bagasse
Display	Backlit LCD
Data Storage	50 sets of readings
Time & Date	24 Hour Real Time Clock
Dimensions	200mm x 90mm x 60mm
Weight	500g
Exhaust	Safety Spigot
Conforms to	BS7927 (and the draft BS7967)

Carbon Monoxide (CO) Measurement
Range	0 to 10,0000 ppm
Resolution	1 ppm
Accuracy	± 5 ppm or 5%, whichever is greater

Oxygen (O2) Measurement
Range	0 to 25%
Resolution	0.1%
Accuracy	± 0.3%

Carbon Dioxide (CO2)
Range	0 to 25%
Resolution	0.1%
Accuracy	Calculated

Ratio (CO/CO2)
Range	0 to 0.999
Resolution	0.001
Accuracy	Calculated

Gross/Net Efficiency
Range	0 to 100%
Resolution	0.1%

Temperature Measurement
Range	-40° to 800°C (-40° to 1472°F)
Resolution	1°C or F
Accuracy (K-Type)	± 0.3%, ± 1°C or ± 2°F

Draft/Pressure Measurement
Selectable Ranges	mBar, kPa and inH2O
Ranges	-150 mBar to +150 mBar
	-15kPa to +15kPa
	-60 inH20 to +60 inH2O
Resolution	0.01mBar
Accuracy	± 0/5% fsd

Included Accessories

• A770 Flue Temperature Probe
• GK11M K-Type Temperature Air Probe
• A795 In-Line Water Trap Bowl Filter Complete
• A763 Mini Pump Protection Filter Assembly
• A766 Battery Charger
• A765 Protective Boot
• A768 Soft Carry Case
• A764 Exhaust Spigot

Quick and simple set up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up, enable tests to be performed quickly.

TPI analyzers remember the last selected fuel, so you don't need to perform fuel selection every time the analyzer is turned on.

---

** REDUCED SERVICING COSTS FOR TPI ANALYSERS **

Service Schedule & Costs for TPI 709R & 712 Flue Gas Analysers

	Includes	Cost	Calibration Certificate (if required)
Year 1	Service/Calibration Any necessary sensor changes Calibration Sticker	£77.95	£15
Year 2	Service/Calibration Any necessary sensor changes Calibration Sticker	£77.95	£15
Year 3	Service/Calibration Any necessary sensor changes Calibration Sticker	£77.95	£15
Year 4	Service/Calibration Any necessary sensor changes Calibration Sticker	£77.95	£15
Year 5	Service/Calibration Any necessary sensor changes Calibration Sticker	£77.95	£15

Prices include return carriage and exclude VAT

• Applies to instruments supplied after 3rd Oct 2011
• The 6 Year Warranty is subject to each of the above annual service/calibrations being carried out.
• Any missed annual service(s) may incur a charge to cover additional checks/parts which may need to be performed/replaced that are deemed neccessary due to these checks/parts not being performed or replaced during previous missed annual service(s).
• Further costs may be applicable should it be deemed that a component needs to be cleaned, replaced or repaired outside of the terms of the warranty.

 

TPI Calibration & Service Helpline: 01293 530196. Please mention Cranefords when arranging your service.

 

 

Due to the degradable nature of the cell used in this product, units are built to order. The despatch period may be up to three working days for this item.